LVM 2SB12 Aero2gen 12v Charge Controller
The LVM 2SB12 regulators are designed specifically for use with the Aero2gen, 12v range of wind generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times.
The SB range is not suitable for installations with any other charging source, such as engine alternator - use a TB unit instead.
Features:
PWM Charging of a single battery bank.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistor.
Can also accept up to 10w of solar pv input.
12v, 60w version.
 Product manual
Price: (1 item) £78.75 / €86.63 (Ex VAT at 17.5%)
Price: (2 or more items) £70.88 / €77.97 (Ex VAT at 17.5%)
| 
|
|
|
LVM 2SB24 Aero2gen 24v Charge Controller
The LVM 2SB24 regulators are designed specifically for use with the Aero2gen, 24v range of wind generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times.
The SB range is not suitable for installations with any other charging source, such as engine alternator - use a TB unit instead.
Features:
PWM Charging of a single battery bank.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistor.
Can also accept up to 10w of solar pv input.
24v, 60w version.
Product manual
Price: (1 item) £78.75 / €86.63 (Ex VAT at 17.5%)
Price: (2 or more items) £70.88 / €77.97 (Ex VAT at 17.5%)
|
|
|
|
LVM 2TB12 Aero2gen 12v Charge Controller
The LVM 2TB12 regulators are designed specifically for use with the Aero2gen, 12v range of wind generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times. The TB range are suitable for twin battery bank installations such as domestic battery bank and engine start battery bank.
The TB range must be used when the batteries are also charged from the engine alternator or alternative charging source (the SB range are not suitable).
Features:
PWM Charging of two separate battery banks.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistor.
Can also accept up to 10w of solar pv input.
12v, 60w version.
Product manual
Price: (1 item) £83.45 / €91.80 (Ex VAT at 17.5%)
Price: (2 or more items) £75.11 / €82.62 (Ex VAT at 17.5%)
|
|
|
|
LVM 2TB24 Aero2gen 24v Charge Controller
The LVM 2TB24 regulators are designed specifically for use with the Aero2gen, 24v range of wind generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times. The TB range are suitable for twin battery bank installations such as domestic battery bank and engine start battery bank.
The TB range must be used when the batteries are also charged from the engine alternator or alternative charging source (the SB range are not suitable).
Features:
PWM Charging of two separate battery banks.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistor.
Can also accept up to 10w of solar pv input.
24v, 60w version.
Product manual
Price: (1 item) £85.58 / €94.14 (Ex VAT at 17.5%)
Price: (2 or more items) £77.02 / €84.72 (Ex VAT at 17.5%)
|
|
|
|
LVM 4SB12T Aero4gen 12v Charge Controller
The LVM 4SB12 regulators are designed specifically for use with the Aero4gen & Aqua4gen 12v range of wind & water generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times.
The SB range is not suitable for installations with any other charging source, such as engine alternator – use a TB unit instead.
This is the temperature compensated Aerogen controller. Temperature compensated charging is essential for providing the best possible battery care in hot or cold climates.
Features:
PWM Charging of a single battery bank.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistor.
Temperature compensated charging voltage.
Can also accept up to 60w of solar pv input.
12v, 240w version.
Product manual
Price: (1 item) £102.29 / €112.52 (Ex VAT at 17.5%)
Price: (2 or more items) £92.06 / €101.27 (Ex VAT at 17.5%)
|
|
|
|
LVM 4SB24T Aero4gen 24v Charge Controller
The LVM 4SB24 regulators are designed specifically for use with the Aero4gen & Aqua4gen 24v range of wind & water generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times.
The SB range is not suitable for installations with any other charging source, such as engine alternator – use a TB unit instead.
This is the temperature compensated Aerogen controller. Temperature compensated charging is essential for providing the best possible battery care in hot or cold climates.
Features:
PWM Charging of a single battery bank.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistor.
Temperature compensated charging voltage.
Can also accept up to 60w of solar pv input.
24v, 240w version.
Product manual
Price: (1 item) £109.37 / €120.31 (Ex VAT at 17.5%)
Price: (2 or more items) £98.43 / €108.27 (Ex VAT at 17.5%)
|
|
|
|
LVM 4TB12T Aero4gen 12v Charge Controller
The LVM 4TB12 regulators are designed specifically for use with the Aero4gen & Aqua4gen range of wind and water generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times. The TB range are suitable for twin battery bank installations such as domestic battery bank and engine start battery bank.
The TB range must be used when the batteries are also charged from the engine alternator or alternative charging source (the SB range are not suitable).
This is the temperature compensated Aerogen controller. Temperature compensated charging is essential for providing the best possible battery care in hot or cold climates.
Features:
PWM Charging of two separate battery banks.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistor.
Temperature compensated charging voltage.
Can also accept up to 60w of solar pv input.
12v, 240w version.
Product manual
Price: (1 item) £157.62 / €173.38 (Ex VAT at 17.5%)
Price: (2 or more items) £141.86 / €156.05 (Ex VAT at 17.5%)
|
|
|
|
LVM 4TB24T Aero4gen 24v Charge Controller
The LVM 4TB24 regulators are designed specifically for use with the Aero4gen & Aqua4gen 24v range of wind and water generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times. The TB range are suitable for twin battery bank installations such as domestic battery bank and engine start battery bank.
The TB range must be used when the batteries are also charged from the engine alternator or alternative charging source (the SB range are not suitable).
This is the temperature compensated Aerogen controller. Temperature compensated charging is essential for providing the best possible battery care in hot or cold climates.
Features:
PWM Charging of two separate battery banks.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistor.
Temperature compensated charging voltage.
Can also accept up to 60w of solar pv input.
24v, 240w version.
Product manual
Price: (1 item) £149.37 / €164.31 (Ex VAT at 17.5%)
Price: (2 or more items) £134.43 / €147.87 (Ex VAT at 17.5%)
|
|
|
|
LVM 6TB12T Aero6gen 12v Charge Controller
The LVM 6TB regulators are designed specifically for use with the Aero6gen & Aqua6gen 12v range of wind and water generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times. The TB range are suitable for twin battery bank installations such as domestic battery bank and engine start battery bank.
This is the temperature compensated Aerogen controller. Temperature compensated charging is essential for providing the best possible battery care in hot or cold climates.
Features:
PWM Charging of two separate battery banks.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistors.
Temperature compensated charging voltage.
Can also accept up to 60w of solar pv input.
12v, 480w version.
Product manual
Price: (1 item) £195.48 / €215.03 (Ex VAT at 17.5%)
Price: (2 or more items) £175.93 / €193.52 (Ex VAT at 17.5%)
| 
Large Picture |
|
|
LVM 6TB24T Aero6gen 24v Charge Controller
The LVM 6TB regulators are designed specifically for use with the Aero6gen & Aqua6gen 24v range of wind and water generators.
The regulator prevents overcharging of batteries, whilst keeping the turbine under load at all times. The TB range are suitable for twin battery bank installations such as domestic battery bank and engine start battery bank.
This is the temperature compensated Aerogen controller. Temperature compensated charging is essential for providing the best possible battery care in hot or cold climates.
Features:
PWM Charging of two separate battery banks.
Fully potted marinised electronics.
Adjustable charging voltage setpoint.
Supplied with dump load resistors.
Temperature compensated charging voltage.
Can also accept up to 60w of solar pv input.
24v, 480w version.
Product manual
Price: (1 item) £195.48 / €215.03 (Ex VAT at 17.5%)
Price: (2 or more items) £175.93 / €193.52 (Ex VAT at 17.5%)
|
Large Picture |
|
|
Read our introduction to:
 Wind generators.
Solar panels.
Deep cycle batteries.
| 
|
|
