Main Web Site
|
Up
|
Product Range
|
Help
|
Search
|
View Basket
|
Checkout
|
Contact Us
|
Home Page
Solar & Wind Store
>
Special Offers
Marlec Rutland FM1803-2 Furling Wind Generator 24v version (brand new)
Marlec's FM1803 was first produced back in 1989 and has since built an excellent reputation for being a quiet and reliable wind generator. Now, with an additional blade and a new design of controller, the latest evolution of the Rutland 1803-2 wind turbine produces even more power.
The new three bladed Rutland FM1803 wind generator provides up to 750w peak, making it suitable for a wide variety of off-grid applications. The FM1803 has been deployed in range of applications from remote telecoms to small off-grid buildings.
The Rutland 1803 has a low friction, flywheel-type alternator, which keeps the turbine spinning between gusts of wind. This results in more power into the battery bank. Full encapsulation of the alternator windings protects them from the elements and the harshest of weather.
The FM1803 also incorporates a furling tail system, which ensures the turbine is not damaged by storm force winds. A high voltage 3 phase generator unit enables long cable runs from the turbine to the controller & battery bank. In turn, this helps optimal positioning of the turbine in the most windy location.
Finely balanced in the factory, the Rutland FM1803 is a smooth running wind turbine, almost silent at lower wind speeds, and with a gentle 'swishing' sound in higher winds. The turbine is designed to mount onto an 81mm internal, 91mm outside diameter, galvanised steel mast.
The MPC1 electronic charge controller is included with the FM1803 turbine. This new controller features a digital status display and automatic power ratio optimisation, as well as protecting the batteries from overcharge. The controller will automatically shut the turbine down when the batteries are full to prevent unnecessary wear.
Rutland FM1803 Features :
- Produces 36 Watts @ 5m/s, 414 Watts @ 11m/s and up to 750 Watts peak.
- Starts generating at wind speeds as low as 3m/s (6-7mph).
- 1.8m rotor diameter, new improved 3 bladed design.
- No radiated interference - to BS EN 89/336/EEC.
- Brushless alternator requires no maintenance.
- Sealed-for-life bearings for a long service life.
Product brochure
Product manual
Wind loading
Price: £1,150.00 / €1,265.00
(Ex VAT at 20%)
Large Picture
Carling Single Pole MCB Circuit Breaker (reduced from £14.95)
High quality miniature circuit breaker (MCB) ideal for use in DC battery, solar and wind energy systems. These devices offer a neat & convenient solution for over-current or short circuit protection, as well as for circuit isolation.
Single pole MCBs are used for DC loads such as 12/24 volt DC lighting. They are designed to recess mount into a flat surface.
80VDC Max 277VAC Max
Trip Amps: 27
Delay: 34 ms
Product brochure
Price: £7.50 / €8.25
(Ex VAT at 20%)
Please select a model
20A
ABB Single Pole D Class MCB Circuit Breaker (reduced from £17.88)
High quality miniature circuit breaker (MCB) ideal for use in high inductive loads. i.e inverters and large motors. These devices offer a neat & convenient solution for over-current or short circuit protection, as well as for circuit isolation.
These MCB's are designed to mount onto DIN rail, ideally in a 'distribution' box.
60VDC Max
440VAC Max
Standard: IEC/EN 60898
Controls and protects against overloads and short-circuits.
Protects circuits which supply loads which have high inrush currents during start up.
Rated current: depending on model
Click here to view suggested enclosures.
Price: £6.95 / €7.65
(Ex VAT at 20%)
Please select a model
1A
10A
20A
